Bad marks, missed cuts and stray lines — and how to fix them.
Troubleshooting
Your fiber laser stops cutting halfway through a big job, or leaves missing passes. Before you blame the machine, check these common, often overlooked, settings and causes from our
Troubleshooting
When your laser engraving comes out too dark or turns into a black blob, the most common reason is that the laser's physical spot is wider than the fine details in your drawing. We
Troubleshooting
You’ve finished an engraving, but faint straight lines mar the surface. This common problem isn't your fill pattern; it's the laser jumping between marks. Learn how to fix it.